Summer motorcycle clothing is a compromise between ventilation and the EN 17092 class. A spring jacket at 30°C loses its point, and a T-shirt meets no class at all. Below: which parameters decide whether gear works in hot weather – and where the compromise still makes sense.
Key takeaways
- A mesh jacket or an AA-rated motorcycle shirt keeps you protected and cool – a T-shirt protects nothing.
- Class AA is the sensible summer standard; AAA is overkill for city heat.
- Thin CE Level 2 protectors (non-Newtonian materials) mean better airflow under the fabric.
- Do not forget the legs: motorcycle jeans with knee armour and summer gloves.

Mesh motorcycle jacket – what is it made of?
A mesh jacket has several layers, each with its own job. The mesh moves air through the side panels and under the arms, while the AA class is kept by reinforced zones on the shoulders, elbows and back.
- Outer layer – in better mesh jackets an open-weave Cordura 500D or 1000D, with aramid fibres in the zones most exposed to abrasion. Cheaper models use polyester without aramid – check whether the manufacturer states the fabric weight and the EN 17092 class.
- Zonal reinforcements – elbows, shoulders and lower back. Here the mesh gives way to full, more abrasion-resistant fabric. EN 17092 requires the class to apply to the whole garment, not just selected panels.
- Protectors – removable, in pockets on the shoulders and elbows. Level 1 is the minimum, Level 2 absorbs more energy and is becoming standard in jackets above 1,500 PLN. Most mesh jackets have a back-protector pocket, but the insert is usually sold separately.
EN 17092 classification – what classes A, AA and AAA mean
EN 17092 classifies motorcycle clothing by the results of laboratory abrasion and seam-strength tests. Every textile summer jacket should show its class on the label.
| Class | What it means in summer | Best for |
|---|---|---|
| A | Minimum abrasion resistance, lightest and most breathable | City commuting |
| AA | The road standard – most professional summer gear has it | Touring and faster riding outside the city |
| AAA | Highest protection, heavy and less breathable | Track; overkill for summer city riding |
Breathable summer clothing with class AA is today the sensible reference point. Class A is enough for commuting through the city, but whenever you leave built-up areas AA gives a bigger margin.
CE protectors – Level 1 or Level 2
EN 1621-1 divides joint protectors (elbows, shoulders, hips, knees) into two levels by the force they transmit to the body:
- Level 1: maximum 35 kN average transmitted force.
- Level 2: maximum 20 kN – almost half as much.
Back protectors have their own standard, EN 1621-2, with lower thresholds: Level 1 up to 18 kN, Level 2 up to 9 kN. Swapping Level 1 inserts for Level 2 usually costs 60–150 PLN per protector. Modern non-Newtonian protectors (e.g. D3O, SAS-TEC) are thinner than old foam Level 1 inserts yet meet Level 2 – they stay flexible, stiffen on impact and leave more room for airflow.
Summer-ready protection with Level 2 armour
Alfa Thrust shirts, hoodies and jeans are AA-rated to EN 17092 and come with bamboo-fibre CE Level 2 protectors.
Motorcycle shirt – an alternative to a jacket
Some manufacturers make shirts and hoodies with full EN 17092 certification that look and wear like ordinary clothes.

The construction has several layers: a cotton outer fabric, a full DuPont™ Kevlar® lining, bamboo Level 2 protectors on the shoulders and elbows, a back-protector pocket and side vent zips. Casper Steel is rated AA to EN 17092-3:2020 and has loops that connect it to motorcycle jeans, so it does not ride up in a slide. The women’s Laura Vixen shares the same construction.
If you ride mostly in the city and do not want a separate jacket for the two hottest months, a shirt like this answers the “what to wear in the heat” question differently than mesh: it looks like a flannel and protects like an AA jacket.
Lower half – trousers and the rest of the set
Leg protection follows the same rules. Motorcycle jeans with an aramid layer and knee protectors look like ordinary trousers yet meet EN 17092. Ordinary skinny jeans lose their structure after a second of sliding.

Compare men’s motorcycle trousers and women’s leggings and jeans – both have AA-rated models suitable for the whole summer. Gloves should have knuckle and finger protection even in the heat: perforated leather or textile-mesh summer gloves beat riding without any.
Build a cool, certified summer set
Pair an AA-rated flannel or hoodie with AA motorcycle jeans – protection that does not look like motorcycle gear.
FAQ
Can you ride a motorcycle without a jacket in summer?
Legally in Poland, yes – only a helmet is compulsory. Technically a T-shirt meets no EN 17092 class, so it will not protect your skin in a slide. A better choice in the heat is a mesh jacket with CE Level 2 protectors or a motorcycle shirt with a Kevlar lining and class AA.
What to wear on a motorcycle at 30 degrees?
A ventilated mesh jacket or a motorcycle shirt with an aramid lining and CE Level 2 armour, motorcycle trousers with a protective layer, a moisture-wicking base layer, summer gloves and ankle boots. Above 40 km/h the temperature under a mesh jacket drops noticeably compared with sitting in traffic.
Mesh jacket or textile with ventilation for summer?
Mesh dissipates more heat on the move and works best above 60 km/h – good for out-of-town routes. A textile jacket with vent zips is more versatile: open in the heat, closed at the first rain. For city riding with frequent stops textile usually wins; for long motorway trips, mesh.



