A budget of up to 1,000 PLN is a sensible ceiling for a first or second motorcycle jacket. In this price range you can find a textile jacket rated AA under EN 17092 with CE protectors. Everything else depends on what the manufacturer includes as standard – and what is left as a separately sold extra.
Key takeaways
- Aim for class AA (EN 17092) – it fits in this budget and gives a real margin outside the city.
- Look for CE Level 2 shoulder and elbow armour included; buy the back protector separately.
- Textile usually beats leather under 1,000 PLN: AA class, membrane, vents and a thermal liner in one jacket.
- No EN 17092 label = not protective clothing, however it looks.

EN 17092 class – what does the label on the jacket mean?
EN 17092 defines five classes of protective motorcycle clothing: AAA, AA and A for garments that protect against both abrasion and impact, plus B and C for special constructions. For a road jacket the three that matter are A, AA and AAA – they differ mainly in how long the fabric survives in the abrasion test.
| Class | Protection level | Typical use | Price range |
|---|---|---|---|
| A | Lowest certified level, lighter and more breathable | Urban commuting | Below 1,000 PLN |
| AA | The road standard – more durable in a longer slide | City and out-of-town riding, touring | Achievable within 1,000 PLN |
| AAA | Highest level | Sport and very intensive riding | Usually above 1,000 PLN |
Read more about the standards in our guide: CE certification for motorcycle clothing – EN 17092 and EN 1621 explained.
What motorcycle jacket for a beginner passes the test?
Class A with CE Level 2 protectors on the shoulders and elbows is enough for urban riding. AA gives a greater durability margin in a longer slide and works well outside the city – within a 1,000 PLN budget it is usually worth aiming for AA if the price difference is small.
Be careful with jackets sold as “motorcycle” without an EN 17092 label. That is uncertified clothing and it is not worth buying, regardless of how it looks.
Textile or leather motorcycle jacket?
Under 1,000 PLN textile usually has the advantage. Manufacturers make 500D or 600D polyester jackets with reinforced impact zones that reach class AA at a lower material cost than decent leather.
A leather jacket for 1,000 PLN usually has thinner hide and weaker reinforcements – 1.2–1.4 mm cowhide with full protector coverage starts clearly above that threshold. A textile jacket in this range gives more: class AA, a waterproof membrane, ventilation, a removable thermal liner and three-season use. Leather wins mainly on abrasion resistance in a very long slide, which is rarely decisive for touring riders.
Protectors – where is it worth paying extra for Level 2?
The inside of the jacket matters as much as the fabric. In this budget the most common configurations are: Level 1 on shoulders and elbows, Level 2 on shoulders and elbows, a back-protector pocket without the insert, and – less often – a full Level 1 set including the back.
Level 2 under EN 1621-1 transmits significantly less force to the body than Level 1. The back is covered by a separate standard, EN 1621-2, with lower thresholds. For road riding a sensible minimum is a Level 2 back protector – but jackets in this price range usually only include the pocket, so the insert is bought separately.

In practice: look for a jacket with Level 2 shoulder and elbow armour included and choose the back protector separately. Ask the seller about the CE markings on the inserts before you buy.
Not sure which protection level you need?
Every Alfa Thrust garment is AA-rated to EN 17092 and ships with CE Level 2 shoulder and elbow armour. Compare the certificates before you decide.
Is it worth choosing a motorcycle jacket with a membrane?
A membrane protects against water and wind while letting water vapour escape. In jackets under 1,000 PLN you will find two constructions:
- Removable internal membrane – zipped inside the jacket. You take it out in summer for better airflow, but in rain the outer layer soaks through.
- Sewn-in membrane (Z-Liner) – a waterproof layer between the shell and the lining. No separate liner to zip in, but the shell can still get wet. The most common solution in this budget: more comfort in rain, weaker ventilation in summer.
Membranes laminated directly to the shell (e.g. Gore-Tex Pro) belong to a higher price bracket and are rare under 1,000 PLN.
Alternative to a jacket – flannel and hoodie with AA certification
Some manufacturers build shirts and hoodies with full EN 17092 certification and CE Level 2 protectors. Shirts usually add an aramid lining (e.g. DuPont™ Kevlar®), while hoodies rely on a single-layer technical knit.

Models such as Casper Steel (men’s flannel shirt, class AA), Victor Beast (men’s hoodie, class AA) or Laura Vixen (women’s flannel shirt, class AA) sit in the same price range as a dedicated textile jacket and carry the same EN 17092 class. The difference is the look – they work as everyday clothes after you get off the bike. They will not replace a three-season jacket: without a thermal liner and a waterproof membrane they are best for warmer, dry days.
Motorcycle jacket – what to check before buying?
Six things decide whether a 1,000 PLN jacket is a good purchase:
- EN 17092 label with class A, AA or AAA – if the shop description omits it, ask for a photo of the inner label.
- CE protectors on shoulders and elbows, ideally Level 2 to EN 1621-1.
- A back-protector pocket for an EN 1621-2 insert – the protector is cheap, but without a pocket there is nowhere to put it.
- Membrane – integrated, removable or none at all.
- Ventilation – zips on the chest, under the arms and on the back.
- Fit – snug at the waist and wrists so the protectors stay in place in a fall.
Looking for protection that does not look like motorcycle gear?
Flannel shirts and hoodies with AA rating and CE Level 2 armour – worn like everyday clothes, certified like a jacket.
FAQ
How much does a good motorcycle jacket cost?
It depends on three things: the EN 17092 class, the CE protector level and the outer material. A textile AA jacket with CE Level 2 shoulder and elbow armour and ventilation fits within 1,000 PLN at many brands. Above that you mostly pay for leather, a laminated Gore-Tex membrane or a premium name.
What is the most sensible motorcycle jacket for a beginner?
A textile jacket rated AA to EN 17092, with CE Level 2 shoulder and elbow armour and a back-protector pocket. A removable membrane and zip vents make it a three-season jacket. If everyday style matters more than a classic motorcycle look, an AA-rated flannel or hoodie with the same protectors fits the same budget.
Jacket with CE Level 2 protectors – what does it give compared with Level 1?
Under EN 1621-1 a Level 2 protector transmits no more than 20 kN of average impact force, while the Level 1 limit is 35 kN. In practice less force reaches your shoulder or elbow at the same impact energy. Protectors made of non-Newtonian materials reach Level 2 at a thickness and weight close to older Level 1 inserts.



